ESP32 development board with Bluetooth camera module View larger

ESP32 development board with Bluetooth camera module



9 Items

in stock, Tallinn

19,20 €

Add to wishlist

More info


- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
-Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
- Support secondary development
Package Included:
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP

Product Specifications:
Module modelESP32-CAM
SPI Flashdefault 32Mbit
RAMinternal520KB+external 4M PSRAM
bluetoothbluetooth4.2BR/EDR and BLE standards
Wi-Fi802.11 b/g/n/e/i
Support interfaceUART, SPI, I2C, PWM
Support TF cardMaximum support 4G
IO port9
Serial port ratedefault 115200 bps
Image output formatJPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range2412 ~ 2484MHz
Antenna formonboard PCB antenna , gain 2dBi
Transmit power802.11b: 17±2 dBm (@11Mbps)
802.11g: 14±2 dBm (@54Mbps)
802.11n: 13±2 dBm (@MCS7)
Receiving sensitivityCCK, 1 Mbps : -90dBm
CCK, 11 Mbps: -85dBm
6 Mbps (1/2 BPSK): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumptionTurn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep-sleep: The lowest power consumption can reach 6mA@5V
Moderm-sleep: up to 20mA@5V
Light-sleep: up to 6.7mA@5V
Power supply range5V
Operating temperature-20 °C ~ 85 °C
Storage environment-40 °C ~ 90 °C, < 90%RH

ESP32-CAM Picture Output Format Rate:
Test environment: camera model: OV2640 XCLK: 20MHz, the module transmits pictures to the computer browser by WiFi.