ARM-CAN arendusplatvorm Vaata suuremalt

ARM-CAN arendusplatvorm LM3S5632

MB53

uus

Hetkel otsas

48,00 €

Lisa soovinimekirja

Rohkem infot

MCU

  • Texas Instruments (former Luminary Micro) LM3S5632
  • 32-bit 50Mhz ARM Cortex-M3
  • 128 KB flash, 32 KB SRAM
  • CAN 2.0 controller
  • USB 2.0 host/device controller

Ports

  • 4 x ADC input (0-3 V measuring range)
  • 4 x PWM output (drives up to 600 mA load)
  • 2 x CAN connector on 1 bus (10 pin header)
  • 1 x SPI
  • 1 x I2C
  • 1 x UART
  • 1 x JTAG (20 pin header)
  • 1 x USB device / host (Micro-AB)

Every pin has I/O functionality (except PWM) ADC and PWM have 3 pin headers with ground and +5 V

On-board features

  • 1 x 350 mW RGB LED
  • 1 x Push-button
  • ZigBee expansion board (optional)

Electrical

  • Supply voltage 5 ± 0,25 V
  • Powered from CAN bus, DC jack or USB device port
  • Can draw up to 2 A from CAN bus or DC jack and up to 500 mA from USB port after enumeration. This includes on-board electronics.
  • Reverse voltage and overcurrent (2 A) protection.

Physical

  • Dimensions 61 x 50,6 x 13,2 mm
  • Weight ~18 g
  • Optional housing (increases height)

More info: http://home.roboticlab.eu/en/hardware/arm-can/controller