Polümorfne termoplastik 100 g Vaata suuremalt

Polümorfne termoplastik 100 g



30 toodet

laos, Tallinnas

6,60 €

Lisa soovinimekirja

Rohkem infot

Polymorph thermoplastic can be reduced to a mouldable condition by immersion in hot water of around 60ºC. The material then turns from opaque to a clear substance. When warm and in mouldable condition it can be easily shaped into anything you like. After cooling down the material hardens. The material also turns from clear to opaque again. When fully cooled it is strong, stiff and tough. In appearance and physical properties it is very similar to nylon and can be sawn, drilled and cut.

Polymorph is non hazardous material and fully biodegradable.