Mini sumo platvorm Zumo32U4

RP20

uus

2 toodet

laos, Tallinnas

144,00 €

Lisa soovinimekirja

Rohkem infot

NB! Zumo 32U4 robot kit ei sisalda mootoreid!

The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot. It measures less than 10 cm on each side and weighs approximately 275 g with batteries (170 g without), so it is both small enough and light enough to qualify for Mini-Sumo competitions, but its versatility makes it capable of much more than just robot sumo battles.

At the heart of the Zumo 32U4 is an Atmel ATmega32U4 AVR microcontroller, and like our A-Star 32U4 programmable controllers, the Zumo 32U4 features a USB interface and ships preloaded with an Arduino-compatible bootloader. A software add-on is available that makes it easy to program the robot from the Arduino environment, and we have Arduino libraries and example sketches to help get you started. A USB A to Micro-B cable (not included) is required for programming. For advanced users who want to customize or enhance their robots with additional peripherals, the robot’s power rails and microcontroller’s I/O lines can be accessed via 0.1″-spaced through-holes along the sides and front of the main board.

Assembled Zumo 32U4 robot, front view.
Assembled Zumo 32U4 robot, side view.
Assembled Zumo 32U4 robot, back view.

The Zumo 32U4 features two H-bridge motor drivers and a variety of integrated sensors, including a pair of quadrature encoders for closed-loop motor control, a complete inertial measurement unit (3-axis accelerometer, gyro, and magnetometer), five downward-facing reflectance sensors for line-following or edge-detection, and front- and side-facing proximity sensors for obstacle detection and ranging. Three on-board pushbuttons offer a convenient interface for user input, and an LCD, buzzer, and indicator LEDs allow the robot to provide feedback.

Kit contents

Contents of the #3124 Zumo 32U4 robot kit.

With the exception of motors, batteries, and a USB A to Micro-B cable, this kit contains everything necessary to build and operate a Zumo 32U4 robot:

Assembled Zumo 32U4 robot.
  • Zumo chassis kit
  • Zumo 32U4 main board
  • Zumo 32U4 front sensor array
  • stainless steel Zumo 32U4 blade
  • 8×2 character LCD
  • two magnetic encoder discs (the encoder sensors are integrated into the main board)
  • IR LEDs (proximity sensor emitters; the detectors are integrated into the front sensor array)
  • through-hole buzzer
  • assorted hardware and connectors

See the Zumo 32U4 robot user’s guide for detailed assembly instructions.

Seonduvad tooted